BackHomeContact UsSearch

PXI-9820 179kB

  • 60 MS/s sampling rate per channel (internal timebase), 65MS/s (external)

  • 130MS/s or 120MS/s sampling rate in "ping pong" mode.

  • 2-ch, 14-bit A/D resolution

  • 30 MHz -3dB bandwidth per channel

  • Up to 512MB on-board SODIMM SDRAM

  • Multiple card synchronization

  PXI-9820 Digitizer

Introduction

ADLINK PCI-9820 is a 65 MS/s, high -resolution PCI/PXI digitizer with deep SODIMM SDRAM memory. The device features flexible input configurations, including programmable input ranges and user-selectable input impedance. With the deep on-board acquisition memory, the PCI-9820 is not limited by the PCI 132 MB/s bandwidth, and can record the waveform for a long period of time. The PCI-9820 is ideal for high-speed waveform capturing, such as radar and ultrasound applications, as well as software radio applications, or those signal digitizing applications which need deep memory for data storage.

Analog Input

The PCI-9820 device features two analog input channels. The small signal bandwidth of each channel exceeds 30 MHz. The input ranges are programmable as either ±5 V or ±1 V. The 14-bit A/D resolution makes the PCI-9820 ideal both for time-domain and frequency-domain applications.

Acquisition System

ADLINK PCI-9820 device uses a pair of 65 MS/s, 14-bit pipeline ADCs to digitize the input signals, and the device provides an internal 60 MHz timebase for data acquisition. The maximum real-time sampling rate is 60 MS/s with internal timebase, and is up to 65 MS/s with external timebase. By using the "ping pong" mode, the sampling rate is up to 120 MS/s with internal timebase or 130 MS/s with external timebase.

MODEL

PXI-9820

Analog
Input
Channels
Channels Single Ended 2
Type Single Ended
Sampling Speed Internal Clock 60MS/s per channel
120MS/s single channel
External Clock 65MS/s per channel
130MS/s single channel
Type Simultaneous Sampling and Acquisition
Bandwidth 30MHz per channel
Resolution 14-bit
Memory 128MB standard or 512MB (optional)
Input
Voltage
Bipolar ±1V ~ ±5V
Impedance 50Ω or 1.5MΩ, DC coupled
Crosstalk 80dB (DC to 1MHz)
THD -75dB
SNR 66dB (±5V); 62dB (±1V)
Dynamic Range 75dB spurious -free
Protection 14V (±5V range) 5V (±1V range)
Trigger Source Analog Ch0 or Ch1 rising or falling (DC coupled)
Digital External or Synchronization Interface (10ns min)
Mode Pre-, Post-, Middle-, Delay-, Repeated -Trigger
Depth Pre Trigger 64 MB to 512 MB, depending on memory option
Post Trigger 64 MB to 512 MB, depending on memory option
FIFO Buffer 3kS
Data Transfer Bus mastering DMA with scatter-gather
General Calibration On-Board 5V reference, ±2ppm/°C drift, ±6ppm/1000Hrs stability
Connectors Ch0 and Ch1 BNC
External Trigger SMB
External Time Base SMB
Software OS Support Windows 98/NT/2000/XP, Linux Red Hat
Drivers VB, VC++, ActiveX, BCB, Delphi, MATLAB, LabVIEW
Optional DAQBench
Links: